Bentley PPF Miami: The Simple Guide to Protecting Your Bentley's Paint in the Toughest Climate
- 2 days ago
- 22 min read
Bentley PPF Miami is a search that owners run for a simple reason. You have one of the most beautiful cars on the road, and you want to keep it that way. In Miami, that is harder than it sounds, because the climate here is genuinely tough on paint. PPF is how you protect it.
PPF stands for paint protection film. It is a clear layer that goes over your paint and takes the damage so your paint does not. Stone chips, road rash, light scratches, bug acid and sun all hit the film instead of your finish. The film can be replaced. Your Bentley's paint cannot, at least not without real cost.
We are Squadra Nostra. We look after exotic and luxury cars across Miami-Dade and Broward County. This guide keeps it simple. What PPF is, why a Bentley needs it, why Miami is so hard on cars, and how to do it right. A Bentley deserves the best protection, and this guide shows you what that looks like.
Table of Contents
1. What Bentley PPF Miami Is in Simple Terms
PPF is a clear, tough film that goes over your paint. Think of it like a strong, invisible screen protector for your car. It is made from a flexible material that can take a hit, a scratch or a chip, and protect the paint underneath. Once it is fitted properly, you cannot really see it.
The idea is simple. Your paint is thin, expensive and hard to replace. The film is thick, tough and easy to replace. So you put the tough, replaceable layer on top and let it take all the damage. When it finally wears out after years, you peel it off and the paint underneath is still perfect.
This technology was first used to protect helicopter parts and military gear from sand and damage. It works so well that it moved into the car world, and the material has only gotten better. On a Bentley in Miami, it is the single best thing you can do to keep the car looking new.
Squadra Nostra Perspective We think of PPF as insurance you can actually see the benefit of. Nobody loves paying for something invisible. But we have watched Bentley owners spend a fortune fixing paint that would have been perfect under film. The car that had PPF from the start always looks better and sells better. Every single time. |
2. Why a Bentley Needs It More Than Most
A Bentley is not a normal car, and its paint is a big part of what makes it special. Bentley paint is famous for its deep, rich, hand finished look. Many Bentleys wear special colors and finishes that took real work to create. That beauty is exactly why it is worth protecting so carefully.
Here is the thing about beautiful paint. The better it looks, the more it hurts when it gets damaged. A stone chip on a plain car is annoying. A stone chip on a deep Bentley finish is heartbreaking, and fixing it properly to match that finish is expensive and not always perfect. Prevention is far better than repair here.
A Bentley is also a big investment, and its value rests heavily on condition. A Bentley with perfect paint holds its value far better than one with chips, swirls and fading. PPF protects both the beauty and the value at the same time. On a car this special, that protection is not a luxury, it is common sense.
3. Why Miami Is So Hard on Paint
This is not marketing. Miami really does throw more at your paint than almost anywhere else in the country, and it all happens at once. Understanding it shows you why PPF matters more here than in a mild climate.
The Sun
Miami sits far south and gets strong sun for most of the year. That sun slowly breaks down paint and clear coat over time, causing fading and dullness. A car parked outside here ages its paint faster than the same car up north. The sun here never really takes a break.
The Salt Air
We are surrounded by ocean, so salt is in the air all the time. It settles on your car and works away at the paint and metal. Every coastal drive and every beachfront parking spot bathes your Bentley in salt. It is invisible, but it is always there, doing slow damage.
The Heat and Humidity
Heat speeds up every kind of damage, and Miami has plenty of it. Humidity keeps dirt, bugs and bird mess sitting wet on the paint for longer, which gives them more time to cause harm. Things that dry off harmlessly elsewhere stay active and damaging here.
The Roads
Construction, beach sand blowing across roads, and heavy close traffic all fling debris at your car. The causeways in particular throw grit at your front end at speed. All of it chips and scratches paint, and a big Bentley front end catches a lot of it.
4. The Lovebug Problem
If you are new to Florida, this one will surprise you. Twice a year, around May and again around September, Florida gets huge swarms of small black insects called lovebugs. They coat the front of every car on the road. It is not a small annoyance. For your paint, it is a real problem.
Here is why it matters. Lovebug remains are acidic. Once they are stuck to your paint and the Miami sun bakes them, that acid starts to eat into your clear coat. Leave them for a few days in summer heat and they can leave permanent marks that need paint correction, or worse, on a deep Bentley finish.
This is one of the strongest reasons to get PPF in Florida. The film gives you a shield between bug acid and your actual paint. You still clean them off, but if you are a day or two late because you were busy or travelling, the acid hits film that can be replaced instead of paint that cannot. On a Bentley, that peace of mind is worth a lot.
Miami Note: Lovebug Season Is Real Damage Every year we see cars come out of lovebug season with etched, marked front ends. Owners who were away or just did not know. The bugs bake on for a week in ninety degree sun and the acid does its work. On film, you wipe them off. On a bare Bentley finish, you are looking at correction. This alone justifies protecting the front. |
5. How the Film Heals Itself
This is one of the best features of good PPF and it is real, not marketing. Quality film has a special top layer that heals light scratches on its own when it gets warm. Small swirl marks and fine scratches simply disappear with a little heat.
The way it works is simple. The top layer of the film wants to return to its smooth shape. When something lightly scratches it, the material is pushed out of place but not removed. Add warmth, and it relaxes back into its original smooth surface, and the scratch vanishes. It is like the film remembers how it should look.
In Miami, this happens on its own all the time, because the sun warms your car every day. Light marks heal without you doing anything. In cooler places people pour warm water on the car to trigger it. Here, the same sun that attacks your paint actually helps your film heal. It is one of the few climate advantages we get.
Reality Check: Self Healing Has Limits Self healing works on light surface scratches, the kind that come from washing and daily use. It will not fix a deep gouge that cut all the way through the film, and it will not undo a hard hit. But the film still did its job by taking that hit instead of your paint. Just do not expect it to erase every kind of damage. It has limits. |
6. PPF vs Ceramic Coating
These two get mixed up all the time, and they do different jobs. Owners often buy one thinking it does what the other does. Here is the simple difference so you get the right thing for your Bentley.
PPF is thick, physical armor. It actually stops stone chips and takes hits. Ceramic coating is a very thin liquid layer that hardens on the paint. It adds shine, makes water bead off and makes the car easier to clean. But it does not stop a stone chip at all. It is a shield against dirt and sun, not against impacts.
What You Want | PPF | Ceramic Coating |
Stop stone chips | Yes | No |
Heal light scratches | Yes | No |
Add deep shine | A little | Yes |
Water beads off | Good | Best |
Sun protection | Very good | Good |
Easy cleaning | Good | Best |
The best answer for a Bentley in Miami is not choosing one. It is both. PPF on the areas that get hit, for real protection, with a ceramic coating on top of the film and the rest of the paint for shine and easy cleaning. They work together. The film protects, and the coating keeps everything looking deep and clean.
7. How Much of the Car to Cover
PPF is not all or nothing. You choose how much of the car gets covered, and that is the biggest thing that decides the cost. Here are the common choices, explained simply.
Partial Front
This covers just the leading edges, like the front of the hood and fenders, plus the mirrors and bumper. It is the cheapest option, but it leaves a line across the hood where the film ends. Many owners do not like seeing that line. It protects the most common chip area, but only that.
Full Front
This covers the whole hood, both full fenders, the front bumper and the mirrors. There is no line on the hood because the film wraps around the natural edges. This is the most popular choice, because the front of the car takes almost all the chip damage. It is the best value protection for most owners.
Full Car
This covers every painted panel on the car. It is the most protection and the highest cost. On a Bentley, which is a big and very valuable car, full car PPF is what serious owners choose. Every panel is protected, and the whole car stays perfect. On a car this special, many owners feel it is the only real choice.
Coverage | What It Covers | Cost | Best For |
Partial front | Leading edges only | Lower | Tight budget |
Full front | Hood, fenders, bumper, mirrors | Mid | Most owners, great value |
Full car | Every painted panel | Premium | A Bentley you want perfect |
8. Full Car PPF on a Bentley
On most cars, full car PPF is a nice option. On a Bentley, it makes a stronger case than almost any other car, and here is why. A Bentley has deep, special, expensive paint, it is a big investment, and its value depends heavily on that paint staying perfect. Full car film protects all of it.
With full car PPF, every panel is shielded from chips, scratches, bug acid and the sun. The whole car heals light marks. The paint underneath stays exactly as it left the factory, for as long as you own the car. When you sell, the paint is still perfect, which on a Bentley is worth real money.
Yes, it costs more, especially on a big car, which we explain later. But think about what you are protecting. A full respray or paint correction on a Bentley to fix damage costs a great deal and never quite matches the original. Full car film means you never face that. For many Bentley owners, it is simply the right choice.
Expert Note: Protect What You Cannot Easily Replace Bentley paint is deep, rich and hand finished, and matching it after damage is genuinely hard and expensive. That is the real argument for full car film. You are not just avoiding chips. You are protecting a finish that cannot be perfectly recreated. On a car where the paint is part of the magic, protecting all of it makes sense. |
9. The Big Panels Problem
Here is something specific to a Bentley that owners do not think about. A Bentley is a big car with large, long panels. A Continental hood, a Flying Spur door, a Bentayga side, these are large flat surfaces. And large panels are harder to film well than small ones.
Why does size matter. Because film has to be laid onto the panel smoothly, with no trapped dust, no bubbles and no wrinkles, and it has to be stretched evenly around the curves. On a big panel, there is more surface for something to go wrong. It takes more skill, more care and a proper clean space to do it right.
This is why a Bentley should go to someone who knows how to handle big panels. A shop that does small sports cars all day may struggle with a large Bentley door or hood. The bigger the panel, the more obvious any mistake is. On a car this size and this valuable, the skill of the installer matters even more than usual.
Reality Check: Big Panels Show Every Mistake A tiny piece of trapped dust under film is visible forever, and on a large flat Bentley hood there is nowhere for it to hide. Big panels need a clean space, real skill and patience. This is exactly why the installer matters more than the film brand on a car like this. A great installer on a big panel is what you are really paying for. |
10. Bentley's Special Paint
Bentley paint deserves its own section because it is part of what makes the car special. Bentley offers deep, rich colors and many hand finished options. Some cars wear custom colors created just for that owner. This paint is a work of craft, not just a coat of color.
That craft is exactly why it is worth protecting. The deeper and more special the paint, the more it costs to fix if it gets damaged, and the harder it is to match perfectly. A special Bentley color that gets chipped or etched cannot always be repaired to look exactly as it did. Prevention is the only perfect answer.
PPF protects that special paint without changing how it looks. Good clear film is invisible, so your deep Bentley color shows through exactly as it should, just with a shield over it. You keep the beauty and you add the protection. On paint this special, that is the whole point of doing it properly.
Expert Note: Correct the Paint First Film is clear, so whatever is under it stays there, locked in for years. If your Bentley has any swirls or marks now, they should be corrected before the film goes on. This is the last chance to make the paint perfect. On a special finish, getting it flawless first, then sealing it under film, is how you keep it perfect for good. |
11. Wrapped Edges: The Sign of Quality
If you learn one thing about judging a PPF job, make it this. Look at the edges. Everything can look fine from a few feet away, but the edges tell you the truth about who did the work and how much they cared.
A cut edge means the film stops on the visible face of the panel. You can see a faint line, dirt slowly gathers along it, and it is the first place the film starts to lift. A wrapped edge means the film continues around the edge of the panel and tucks behind, out of sight. No line, nowhere for dirt to collect, nothing to lift.
Wrapping edges takes far more time and skill. It often means removing panels, lights, badges and trim so the film can tuck underneath. That extra work is exactly why a proper job costs what it costs, and why a suspiciously cheap quote is cheap. They are not removing anything, and the edges will show it.
Expert Note: Ask This One Question When you get a Bentley PPF quote, ask whether they remove panels and lights to wrap the edges. The answer tells you everything about the quote. If the price seems too good, this is usually where the corners were cut. In Miami humidity, a cut edge collects grime and starts lifting far sooner than it would in a dry place. |
12. Model Guide: Continental, Flying Spur, Bentayga
Bentley makes a few main models and each one has its own protection story. Here is how PPF fits each of the cars we see most in Miami.
Continental GT
The Continental is Bentley's grand coupe, and owners drive them. That means real road miles, which means real chip and scratch exposure on the front. A full front is the minimum here, and full car is a strong choice for a car that gets used and deserves to stay perfect. The long hood especially benefits from film.
Flying Spur
The Flying Spur is the big luxury sedan, often driven or chauffeured. It has large doors and long panels, and it is frequently a special color. This car makes a strong case for full car film, both to protect the big panels and to keep a special finish flawless. Its size means big panel skill matters here.
Bentayga
The Bentayga is Bentley's SUV, and SUVs take a beating. Higher ground clearance means it catches road debris, and it is often used more like a daily vehicle. Rocker panels, lower doors and the front all take hits. A track style package or full car film suits how a Bentayga actually gets used.
13. Ceramic Coating on Top of PPF
This confuses owners, so let us keep it simple. Ceramic coating and PPF are not two choices where you pick one. They are partners, and the best result on a Bentley uses both together. They solve different problems and they help each other.
PPF stops the physical damage, the chips and scratches. Ceramic coating goes on top and makes the surface slick and shiny, so water beads off and dirt does not stick. It also adds another layer of sun protection. Putting ceramic over your film means the film itself is easier to clean and stays looking deep and glossy.
In Miami this pairing makes real sense. Ceramic on top means bug remains and bird mess sit on a slick surface and wipe off more easily. You scrub less, which means fewer swirls from cleaning. On a Bentley, where you want the finish flawless, the two products together give you the best and easiest to keep result.
Miami Note: Coat the Film and the Paint Do the ceramic coating over both the filmed areas and any bare paint around them. Then the whole car cleans the same way and the exposed paint gets its sun protection too. Coating only part of the car leaves you with a finish that cleans unevenly and ages unevenly. On a Bentley, do it all at once and do it properly. |
14. How the Work Is Done
A proper PPF job is far more involved than most owners realize. Putting the film on is actually the easy part. Everything before it is what makes the result perfect. Here is how a proper Bentley job goes, in simple steps.
Step One: Inspect the Paint
We look at the paint closely under good light. Any swirls, scratches or marks are found now, because film is clear and it locks in whatever is underneath. On a special Bentley finish, this careful look is important. We need to know exactly what we are working with before anything goes on.
Step Two: Clean and Correct
The car is washed and deeply cleaned to remove every bit of dirt bonded to the paint. Then any needed paint correction happens, because this is the last chance to make the finish perfect. Once film goes on, whatever is under it is sealed there for years. On a Bentley, getting this right is not optional.
Step Three: Remove Parts
Panels, lights, badges and trim come off where needed so the film can wrap around edges and tuck out of sight. This is the extra work that separates a real job from a quick one, and it is why a proper Bentley job takes days, not hours. The big panels make this careful work.
Step Four: Fit the Film
The film is laid on wet, positioned carefully, then pressed to push out all the liquid and air. This must happen in a clean space, because one piece of dust under clear film shows forever, especially on a big Bentley panel. A clean, controlled environment is a must, not a nice to have.
Step Five: Reassemble and Cure
Everything goes back together, and the film is left to settle and dry. During this time small hazy spots are normal and they clear as it cures. The car should not be washed for about a week. Then it is ready, protected and looking exactly as it should.
15. Caring for PPF After It Is On
Film is tough, but how you care for it decides how long it looks great. The good news is that it is simple, and mostly about avoiding a few mistakes.
● Wait about a week after fitting before the first wash, so it can cure.
● Hand wash with a gentle, pH neutral soap and two buckets.
● Never use an automatic car wash with spinning brushes.
● Remove bugs and bird mess quickly, especially in lovebug season.
● Do not blast a pressure washer straight at the film edges.
● Rinse off salt after coastal drives before it sits and dries.
● Park in shade or a garage when you can, to fight the sun.
The worst thing for PPF is an automatic car wash with spinning brushes. Those brushes drag grit across the film and catch the edges, causing scratches and lifting. If you have invested in protecting your Bentley, hand washing is part of the deal. It is a small habit that keeps the film and the car looking perfect.
16. Does Cheap Film Work in Miami
Owners hear horror stories about PPF turning yellow, and they hesitate. Here is the simple truth. That reputation comes from old, cheap film. Modern quality film does not do that. But cheap film still can, and in Miami it does it faster.
Old, cheap film was made from a material that yellowed badly under the sun. In a place like Miami it happened fast. Modern quality film is made from a better material with sun protection built in, and it stays clear for years. This is exactly why brand and quality matter more here than in a mild climate.
On a Bentley, cheap film is a false saving. Our strong sun finds the weakness in any budget product. A cheap film that yellows in three years means paying to remove it and do it again, which costs more than doing it right the first time. On a car this valuable, buy quality film and have it fitted properly. It is the cheaper path in the end.
Warning: Cheap Film on a Bentley Is a False Saving Our Miami sun is brutal and it finds every weak product. A cheap film that yellows or lifts means removing it and redoing the whole car, which on a big Bentley is a serious cost twice over. This is one of the categories where trying to save money genuinely costs you far more. On a Bentley, quality film is the only sensible choice. |
17. Value, Resale and Warranty
PPF is not just about looks. On a Bentley it directly protects your money, and that is worth being clear about.
A Bentley's value depends heavily on its condition, and paint is a huge part of that. A car with perfect, protected paint sells faster and for more than one with chips, swirls and fading. Serious buyers notice, and they pay for a car that has been cared for. PPF is proof of that care, and it keeps the paint that buyers are judging in perfect shape.
Quality film also comes with a long warranty, often around ten years, covering yellowing, cracking and lifting. And it removes cleanly when the day comes, leaving the paint underneath exactly as it was. So you get years of protection, and then perfect paint when you take it off. On a Bentley, that is protecting your investment the smart way.
Expert Note: Keep Your Documentation Keep your PPF invoice and the film details. When you sell your Bentley, being able to show that the car has worn quality film from a proper installer since new is genuinely persuasive to a serious buyer. It proves the paint underneath is perfect and that the car was cared for. That proof of care is exactly what the luxury market pays for. |
18. What It Costs on a Bentley
Let us be honest about cost. PPF on a Bentley costs more than on a small car, and there is a simple reason. A Bentley is a big car with large panels, so it takes more film and more hours to do properly. The table below shows what drives the price.
Factor | Effect on Price | Notes |
Coverage level | Biggest factor | Full car costs the most |
Car size | Bentley is large | More film, more hours |
Big panels | More labor | Skill and time to do right |
Film quality | Worth it | Cheap film fails in Miami sun |
Edge wrapping | Adds labor | This is where quality lives |
Ceramic on top | Add on | Strongly recommended here |
Be careful of the cheap quote. On a Bentley, if one shop is far below the others, something is being skipped, usually the edge wrapping or the film quality. On a car this valuable, cheap film that fails or a rushed job that lifts costs you far more in the end. Quality film, fitted properly, is the real value here.
19. How Squadra Nostra Handles Bentley PPF
We treat a Bentley as the special car it is. We are mobile across Miami-Dade and Broward County and we work to OEM and manufacturer correct standards. We start by inspecting your paint honestly and telling you exactly what it needs before we recommend anything.
Sometimes that means correcting the paint first, because film locks in whatever is underneath and there is no going back on a special finish. Sometimes it means recommending full car for a Bentley where the paint is worth protecting completely. We give you the right advice for your car, not just the biggest invoice.
Our team carries more than 15 years of combined work on exotic and luxury cars including Bentley, Rolls-Royce, Lamborghini, McLaren, Ferrari and Porsche. We know how to handle big panels, we know special paint, and we know what Miami does to a finish. Film work that needs a clean, controlled space happens at a proper facility, which we arrange.
What You Get With Us
● An honest paint inspection before anything is recommended.
● Paint correction first where needed, because film seals it in.
● Quality film only, because Miami sun punishes cheap product.
● Skilled work on Bentley's large panels, done in a clean space.
● Edges wrapped properly, not cut, for a clean lasting finish.
● Ceramic coating planned together with the film, not later.
● Photo and video records of the full job.
Ready When You Are Call 305-250-9853 or email info@squadranostra.com. We are open Monday to Friday from 8 AM to 8 PM and Saturday to Sunday from 10 AM to 6 PM. Tell us your Bentley and how you use it and we will plan the right protection for the Miami climate. |
20. Closing Thoughts
A Bentley is one of the most beautiful cars in the world, and its deep, special paint is a big part of that beauty. Miami is genuinely hard on paint, with strong sun, salt air, heat and lovebug swarms that bake acid onto your finish. PPF is the one thing that truly stands between all of that and your Bentley's paint.
If you protect your car, do it right. Choose quality film, because our sun finds every cheap product. Choose an installer who knows how to handle big Bentley panels and who wraps the edges properly. Correct the paint before you seal it. Add a ceramic coating on top. And hand wash it. Those simple things keep the car perfect.
Do all of that and your Bentley looks like the day you took delivery for as long as you own it, and it sells for more when that day comes. On a car this special, in a climate this tough, protecting the paint is not a luxury. It is simply the smart thing to do, and it is one decision you will never regret.
Frequently Asked Questions
These are the questions Bentley owners in Miami ask us most about paint protection film.
FAQ 1: How much does Bentley PPF cost in Miami?
It depends on how much of the car you cover and that a Bentley is a big car. A partial front is the cheapest but leaves a line. A full front is the popular mid choice. Full car is the premium option and the strong choice on a Bentley. The large panels mean more film and hours. Call us with your model for a clear number.
FAQ 2: Is PPF worth it on a Bentley in Miami?
More than on almost any car. A Bentley has deep, special paint that is expensive and hard to match if damaged, and Miami has strong sun, salt air, heat and lovebug swarms that attack it. PPF is the only thing that physically stops chips and shields the paint. On a car this valuable in this climate, it is genuinely worth it.
FAQ 3: Should I do full car or just the front?
On most cars a full front plus ceramic is the smart balance. On a Bentley, full car makes a stronger case because the paint is special, the car is a big investment, and its value depends on that paint staying perfect. Many Bentley owners choose full car for exactly that reason. It protects everything and keeps the car flawless.
FAQ 4: What are lovebugs and why do they matter?
Twice a year, around May and September, Florida gets huge swarms of small black insects that coat the front of cars. Their remains are acidic, and baked in Miami sun they eat into clear coat within days. On a Bentley finish that is expensive to fix. PPF gives you a shield so the acid hits film you can replace, not paint you cannot.
FAQ 5: What is the difference between PPF and ceramic coating?
PPF is thick armor that stops stone chips and heals light scratches. Ceramic coating is a thin layer that adds shine, water beading and easy cleaning but stops no chips at all. They are not choices, they are partners. The best result on a Bentley is PPF for protection with ceramic coating on top for shine and easy cleaning.
FAQ 6: Will PPF turn yellow on my Bentley?
Old, cheap film did yellow badly, and that reputation stuck. Modern quality film has sun protection built in and stays clear for years. But cheap film still can, and our Miami sun makes it happen faster. This is exactly why quality film matters more here. On a Bentley, cheap film that yellows is a costly mistake.
FAQ 7: Why does the installer matter so much on a Bentley?
Because a Bentley has big, long panels, and big panels are harder to film without trapped dust or wrinkles. A great result on a large flat hood or door takes real skill, patience and a clean space. On a car this size and value, the installer matters even more than the film brand. This is skilled work, not a quick job.
FAQ 8: Should I correct the paint before PPF?
Yes, and on a Bentley it is important. Film is clear, so it locks in any swirls or marks under it for years. The moment before the film goes on is the last chance to make the special paint perfect. On a deep Bentley finish, getting it flawless first and then sealing it under film is how you keep it perfect for good.
FAQ 9: Can PPF be removed without hurting the paint?
Yes, when quality film was fitted properly. Heat softens it and it peels away cleanly, leaving the paint exactly as it was underneath. That is the whole promise of PPF. Problems only come from cheap film, poor fitting, or film left far past its life. Good film on a Bentley comes off clean and leaves perfect paint.
FAQ 10: How do I wash a Bentley with PPF?
Hand wash with a gentle pH neutral soap and two buckets. Never use an automatic wash with spinning brushes, which drag grit across the film and catch edges. Do not blast a pressure washer at the edges. Remove bugs and bird mess quickly. And wait about a week after fitting before the first wash so the film can cure.
FAQ 11: Does PPF help my Bentley resale value?
Yes, meaningfully. A Bentley's value depends heavily on condition, and paint is a big part of that. A car with perfect, protected paint sells faster and for more. Serious buyers notice and pay for it. Keep your PPF invoice and film details, because proof that the car was cared for is exactly what the luxury market rewards.
FAQ 12: Can you do the work at my location in Miami?
We are fully mobile across Miami-Dade and Broward County for planning and inspection. The film fitting itself needs a clean, controlled space to keep dust off the big panels, so that happens at a proper facility, which we arrange for you. You stay looked after and informed through the whole process.
How-To: Plan Your Bentley PPF Project
Here is the simple path from an idea to a protected Bentley with our team.
1. Note your Bentley model, color and how you use the car.
2. Decide your priority. Budget, best value or full protection.
3. Think about how long you plan to keep the car.
4. Call 305-250-9853 or email info@squadranostra.com with the details.
5. We inspect the paint and tell you if correction is needed first.
6. We recommend a coverage level that suits your Bentley.
7. We plan the ceramic coating together with the film.
8. We correct, fit the film in a clean space and wrap the edges.
9. We hand you photos, video and your film documentation.
Comments